Operating Instructions
SPECIFICATIONS
Operating Temperature Range
-5 to +35
℃
(+23 to +95
℉
)
Operating Humidity Range
5 to 90%RH (No Condensation)
Input Video Signal
0.5-1.0 Volts P-P
Input DDC Signal
5 volts p-p(TTL)
Support Video Format
DTV/HDTV:576i/480P/576P/720P/1080i/1080P
3D video
①
Video Output
HDMI, HDCP
Support Audio Format
DTS-HD Master Audio
、
Dolby true-HD etc.
Transmission Distance
1080P 8-bit 50m(Maximum) over single CAT5E/6 /24AWG/Solid
②
Power consumption
5watts(Maximum)
Dimension (L×W×H)
83x48x25mm
Net Weight
250g(Pair)
Note1: Specifications are subject to change without notice. Mass and dimensions are approximate.
①
Sink must support 3D video when sources is 3D device
②
When in 36Bits deepcolor mode, we suggest set the HDMI source device to output 1080i or 720p.
PACKING CONTENTS
1) Main Unit: Transmitter & Receiver
2) DC 5V 1A x2PCS
3) Operating Instructions
PANEL DESCRIPTIONS
Transmitter Panel
1. Status of signal connection 2.HDMI input 3.EDID copy button
4. CAT-5E/6 output 5.Power input
3
Operating Instructions
Receiver Panel
1. Status of signal connection 2. HDMI output 3. Status of power input
4. CAT-5E/6 input 5. Power input
*Note: When the sink can’t display the signal, try to connect HDMI transmitter to
the display device. Plug the power supply into Transmitter, press the “EDID copy
button” and the light flashes, the EDID data has been copied from the display
device successfully, at least press ”EDID copy button” for 3 seconds, The EDID will
be reset to the default setting.
CONNECTING AND OPERATING
1) Connect the HDMI signal sources (Such as PS3, STB etc) to HDMI Transmitter.
2) Connect CAT5e/6 cable to both the output of the transmitter and input of the
Receiver. (The cables must follow the standard of EIA-TIA 568B).
3) Connect the HDMI display (Such as HD-LCD, HD-DLP) into the Receiver.
Attention: Insert/Extract cables gently.
Typical Application
4
