J-Tech Digital JTD-185, Руководство пользователя

Страница: 6 / 14

-4-
1/5
Rear Panel
No. Name Function Description
1
AUDIO OUT
(COAX, L/R) Coaxial/analog audio output port; connect to
amplifier or speaker
2 HDMI Port
IN: HDMI input port; connect to HDMI source device
with HDMI cable
LOOP OUT: HDMI loop output port; connect to
HDMI display device with an HDMI cable
3
CAT OUTPUT
Port (1~4)
Connect to the CAT IN port of the CAT receiver with
a CAT cable.
4
Link Signal
Indicator LED
(Green)
Illuminating: Transmitter and receiver are connected
Dark: Transmitter and receiver are not connected
5
Data Signal
Indicator LED
(Orange)
Illuminating: HDMI signal with HDCP
Flashing: HDMI signal without HDCP
Dark: No HDMI signal
6 IR OUT
Connect the IR Blaster cable to transmit IR signal
from the CAT receiver
7 DC 12V
Plug the DC 12V power supply into the unit and
connect the adaptor to an AC outlet.
(Note: The
transmitter can power the receivers via CAT cable)
Side Panel
No. Name Function Description
1
EDID DIP
Switch
Used to set EDID mode. Please refer to Section
“6. EDID Mode” for details.
2 SERVICE Port
Used for firmware update or serial port command
control