J-Tech Digital H.264 Скачать руководство пользователя страница 3

Страница: 3 / 21

Introduction

Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.

Features

Supports H.265/H.264 Encoding

Supports HTTP, RTSP, RTMP/RTMPS, HLS, FLV, ONVIF(UDP/RTP) Protocol

CBR/VBR Rate: Up to 100Mbps

Supported Audio Encoding Format: AAC

Max Resolution: 4K@30HZ YUV 4:4:4, (HDCP 2.2 & 1.4 Compliant)

Supports WEB GUI Control: Upgrade, Reboot and Reset Available via WEB GUI

Supports NTP (Network Time Protocol)

Supports Video & Audio Parameter Settings and Synchronization

Supports Network Parameter Configuration

Includes Local HDMI Loop Output Port and Supports RS232 Pass Through

Front LED Displays Firmware Version, IP Address, MAC Address, Channel Info etc.

Specifications

Performance

Protocol

H.265 & H.264

Video Format

480P | 720P | 1080P | 4K2K | 800x600 | 1280x1024
@60Hz

Audio Format

PCM 2.0 | Audio sampling Rate 48KHz

HDCP

HDCP 2.2 &1.4

RS232 Baud Rate (bps)

2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200

Internet Protocols

Request for Switch/Router

Supports IGMP & DHCP

Содержание H.264






















Результаты поиска

Содержание H.264

Отзывы:

Бренды по названию

Популярные бренды

J-Tech Digital H.264, Руководство пользователя

Результаты поиска

Содержание H.264

Отзывы:

Бренды по названию

Популярные бренды