J Plus, Inc
J Plus Proprietary and Confidential
49/88
7.2.3.6
Neighbor Cell
From the tree menu, select Neighbor Cell to move onto the Neighbor Cell setup page. You can Add Neighbor Cell
and modify/delete a registered neighbor cell.
Please refer to Table 13for detailed input parameter information. Like other setting procedure, the changes must
be saved.
Menu
Description
eNodeB Type
Select the type of Neighbor Cell (Default: Macro).
Neighbor Cell IP Address
Null(default)
If the Femto type is selected, this value should remain as 0.0.0.0.
Cell ID
Insert eNodeB ID of Neighbor Cell.
PLMN ID
Insert PLMN ID of the Neighbor Cell.(
Default: 8
).
TAC
Insert TAC of the Neighbor Cell.
PCI
Insert PCI of the Neighbor Cell.
DL EARFCN
Insert DL EARFCN of Neighbor Cell.
This must be the frequency value included within EUTRA Frequency under basic
menu)
(
Default: 39150 for Band 40
).
UL EARFCN
Insert UL EARFCN of Neighbor Cell.
This must be the frequency value included within EUTRA Frequency under basic
menu)
(
Default: 39150 for Band 40
).
QOFFSET
Insert q-OFFSET of the Neighbor Cell (Default :0)
X2 Trigger
Select the type of handover
Handover (
Default: 0
).
If the Femto type is selected, this value should remain as 0
(
S1
-based HO:
0
and
X2
-based HO:
1
).
Access Mode
Select the type of Access Mode (Default: Open).
CSG ID
Insert CSG ID of the Neighbor Cell
Table 13: Description of Neighbor Cell Parameter
Содержание Juni JLT622P
Страница 39: ...J Plus Inc www juniglobal com J Plus Proprietary and Confidential 39 88 Figure 27 Static Routing SAS...
Страница 43: ...J Plus Inc www juniglobal com J Plus Proprietary and Confidential 43 88 Figure 30 CMPv2...
Страница 82: ...J Plus Inc www juniglobal com J Plus Proprietary and Confidential 82 88 Figure 94 Alarm Occurrence History...
