2
http://www.jperkinsdistribution.co.uk
PREPARING FOR FLIGHT
1. UNPACK YOUR TWISTER CP GOLD
▼
Carefully remove the model and other items
from the packaging.
▼
Inspect the model to check that nothing
is damaged and that all components have
been included.
BATTERY & CHARGER
2. CONNECT CHARGER TO POWER
SUPPLY
▼
The charger supplied is designed to
automatically charge the LiPo battery in
around 1 hour from a discharged state.
▼
The charger is powered by the supplied
240V AC power supply or alternatively, a 12V
DC power source such as a 12V gel cell or
car battery can be used.
▼
Plug the connector from the AC power
adapter or the 12V DC power lead into the
socket on the right hand side of the charger.
See below:
▼
If using a 12VDC power source, connect
the red alligator clamp to the positive (+)
terminal and the black alligator clamp to the
negative (-) terminal.
▼
The ‘POWER’ LED will fl ash red.
3. CONNECT THE BATTERY TO THE
CHARGER
▼
Plug the white 4 pin connector on the fl ight
battery into the socket on the right side of
the charger.
▼
The green LED will light and the red ‘POWER’
LED will glow solid red.
▼
When the battery is fully charged, the green
LED will go out.
▼
The battery can now be disconnected from
the charger and is ready for use.
WARNING!
Li-poly batteries can be dangerous!
Do not leave battery unattended when charging
Do not attempt to charge a warm battery. Allow
battery to cool before charging.
Disconnect battery immediately should battery
become hot to touch.
