10
35. Select
PROG.MIX1
from the radio menu.
Set the mix for
ELEV
to
FLAP
. Make sure
that the rates are both at -100% and that
the switch is set to
MIX
. There should be
no offset for this mix.
36. Select
PROG.MIX2
from the radio menu.
Set the mix for
ELEV
to
AUX2
. Make sure
that the rates are both at +100% and that
the switch is set to
MIX
. There should be
no offset for this mix.
37. Select
PROG.MIX3
from the radio menu.
Set the mix for
AILE
to
FLAP
. Make sure
that the rates are both at -100% and that
the switch is set to
ON
. There should be
no offset for this mix.
38. Select
PROG.MIX4
from the radio menu.
Set the mix for
AILE
to
AUX2
. Make sure
that the rates are both at -100% and that
the switch is set to
ON
. There should be
no offset for this mix.
39. On
LOW RATES
the Ailerons should
move
1/2”
in both directions. The Thrust
Vector units should move in the same
direction as the Ailerons.
NOTE
: When the Ailerons are in their neutral
position the Thrust Vector Nozzles should be
in their neutral positions also. If they are not
you must adjust them mechanically by screw-
ing or unscrewing the ball link connector to
achieve a neutral position.
Содержание F/A 18E Super Hornet
Страница 1: ......
