99
ASSEMBLING RACKS UPWARD:
1. When stacking racks on top of each other the assembly process is the same, however when assembling a next tier
of uprights the use of the stacking bracket, (M) is needed.
2. Assemble the upright as shown in steps 1 thru 10 on page 3.
3. Take one of the assembled uprights and place it on top of an already fully assembled bottom rack. The use of the
plastic cap, (D) should not be used between the upright beams and needs to be removed.
4. Take the stacking bracket and apply to the upright beam making sure to engage the tabs into the top and bottom
upright beams.
5. Apply stacking brackets, (M) to ALL 4 uprights before assembling any shelf beam on the top rack.
6. After the brackets are in position, insert the locking pin, (G) into the holes provided.
7. Assemble the remaining shelves in the desired position.
8. Again the use of a wall mounting bracket (F) is needed for both racks after assembly is complete.
Fig. 10
Locking Pin Holes
G
