4
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING (THIS
APPLIANCE)
WARNING – To reduce the risk of fire, electric shock, or
injury:
Use only as described in manual. Use only manufactures recommended
attachments.
Do not allow to be used as a toy. Close attention is necessary when used by or
near children.
Keep hair, loose clothing, fingers, and all parts of body away from openings and
moving parts.
Never use air nozzle for anything other than for its intended use.
SAVE THESE INSTRUCTIONS
Installation:
Determine location to mount unit
(
“DANGER” “THIS EQUIPMENT INCORPORATES PARTS SUCH AS
SWITCHES, MOTORS, OR THE LIKE THAT TEND TO PRODUCE
ARCS OR SPARKS THAT CAN CAUSE AN EXPLOSION. WHEN
LOCATED IN GASOLINE-DISPENSING AND SERVICE STATIONS
INSTALL AND USE AT LEAST 20 FEET (6 M) HORIZONTALLY FROM
THE EXTERIOR ENCLOSURE OF ANY DISPENSING PUMP AND AT
LEAST 18 INCHES (450 MM) ABOVE A DRIVEWAY OR GROUND
LEVEL.”
Unit to be supplied with 110VAC, 10AMP service. Make sure adequate
wire service is supplied to unit, under sizing wire may result in damage to
compressor and/ or machine malfunction (fire hazard).
Unit to be installed by a qualified electrician.
Grounding Instructions
: This appliance must be connected to a
grounded metal, permanent wiring system; or an equipment-grounding
conductor must be run with the circuit conductors and connected to the
equipment-grounding terminal or lead on the appliance.
Mount pattern for unit is shown in Fig 1.
Conduit for electrical can be stubbed up thru bottom of machine or
stubbed to knockout located in the lower rear of machine.
Wiring is to taken up to timer assembly located in the top of unit.
