Assembly Instructions
15
Step
19
Step
20
DIAG 1
DIAG 2
DIAG 3
XX
XX
YY
YY
XX
XX
YY
YY
XX
XX
YY
YY
Measure to
external corners
Squaring up the unit.
IMPORTANT!
Ensure a tape
measure is used
to square unit up.
XX
XX
YY
YY
x4
Add stability blocks.
Slide the thin point of the
stability blocks
between the back panel
and the grooves in the
bottom and shelf panels.
Once inserted fully,
tighten the screws in the
stability blocks.
J
J
You can do this by
measuring between
XX - XX and YY - YY
ensuring these are the
same (DIAG 1).
If they are not (DIAG 2)
Apply slight pressure as
indicated (DIAG 3) until
they are the same.
J
J
J
J
Stand the unit upright
2 people reccomended.
J
