Safety and Warnings
•
This table complies with the prescribed safety regulations. Inappropriate use may cause damage to persons and
table.
•
Please read the operation manual prior to start using the table. It provides you with important information
about safety, use, installation and maintenance of the table, and thus protecting you and your children and avoiding
damage on the table.
•
Please guard this operation manual and pass it on to any future owner!
•
70kg weight need uniform distribution on the top.
•
Do not place any objects above
cm underneath the table.
•
In memory function setting, 1 cm errors is allowable with the measurements.
•
•
The appliance is only to be used with the unit provided (Power supply).
Usage
The electromotive, height-adjustable tables are designed for workstations in dry work environments only. The table height is infinitely
adjustable, so that it can be set to the most ergonomically suitable working level.
They have not been designed for other purposes than those included in this manual, e.g. they are not to be used in areas of high humidity
or dampness, nor for lifting people.
Any other use is at one
’
s own risk!
Liability:
The manufacturer accepts under no circumstances warranty claims or liability claims for damages arising from improper use or
handling of the table frame other than that described in this operation manual.
Do not crawl, lie or move around under the table frame, and do not sit or stand on the table frame.
62
3 of 15
* Whenever the desk is disconnected from power the learning process
will need to be undertaken
* After assembly,please must complete the following learning &
reset process before using this product.
7
Содержание SEDF129WC1
