4
For assembly as a 5 shelf unit,
use the leg joiners in each leg
angle as illustrated if none of
your shelves are positioned at
this point. Refer to Step 3. for
putting a shelf at this point.
5
Fit the MDF shelves
onto the shelf
supports
after full assembly.
The corners of the shelves will fit into
the corners of the leg angles.
34
1
2
Fit another 2 short shelf supports
at the desired height then fit the 2
long shelf supports to match the
short shelf supports.
Decide on the position
you require the bottom shelf to be.
Fit 1 short shelf support
between the 2 leg angles.
Repeat this again
making sure that the same short shelf support
is at the same height.
Now fit the 2 long shelf supports
matching the
2 short shelf supports.
Always hammer gently,
being sure the shelf
support tabs are in line with the leg angle slots.
If the tabs are out of line,
simply bend
them to line up either way to suit.
Do not use force
and damage the tabs.
When hammering the shelf supports,
do not
hit the upturned flange, always hammer the
leg surface closest to the angle.
For assembly as a
5 shelf unit,
fit the
short shelf support
between the top
leg angles using
the bottom support
to join the top and
bottom leg angles
in the centre unit
as illustrated (3a).
Now repeat this at
the other end and
fit the 2 long shelf
supports again
matching the short
shelf supports.
3
