J.ASSY Selenium, Руководство оператора

Страница: 6 / 9

INSTRUCTIONS FOR OPERATIONS | SELENIUM Pneumatic Seed Meter | | J.Assy Agricultural | INSTRUCTIONS FOR OPERATIONS
11 10
Seed meter window
Selenium has a window that
offers the possibility to monitor
the singulation of the seeds in real
time. To open the window, simply
slide it as shown in the side image.
After the singulation check, keep
the window closed.
Maintenance
Preventive maintenance before planting
1. Crop kit::
Check the
disc, singulator and ejector
. Replace the
crop kit when there is excess wear in any of the
following parts:
3. Powder graphite in the seed meter:
Make sure the meter is well lubricated with
powdered graphite before each planting , if not,
apply powdered graphite in the meter before filling
it with seed .
Singulator
Lobes
Singulator
Lobes
Disc
Ejector Disc
Hole
2. Vacuum Seal:
Check for excessive wear, cracks or holes in the
vacuum seal. If any of the above items are present,
replace the seal.
Check for excessive wear, cracks or holes in the
vacuum seal. If any of the above items are present,
replace the seal.
4. Graphite in the disc:
Check if the graphite on the back
of the disc (side with the ejector
is worn and, if so, apply J. Assy
Lubricant Graphite Spray to the
entire surface of the disc).
STEP BY STEP
TO REPLACE THE SEAL:
A. Remove the vacuum seal from
the meter lid by
pulling it up
.
B.
First assemble the
ends
of the
new seal in the meter lid.
C.
Fit the entire
vacuum seal
into the
meter lid by pressing it down .
IMPORTANT:
Always keep the back of the disc well graphited
to achieve a good lifespan of the vacuum seal.