J.ASSY KIT APOLLO, Руководство пользователя

Страница: 12 / 17

12
U
ser Guide | Ap
ollo K
it
If the spacing between seeds in the soil, which is measured by
COV (Coefficient of Variation) or SRI (Seed Distribution Index), is not
sufficient, we recommend that the following actions be taken:
High COV or low SRI
Make sure that the vacuum pressure is correctly set. If multiples
persist, decrease the vacuum pressure until the multiples have been
reduced as much as possible.
Check that the seeds have been properly lubricated. It is
recommended that dry powdered graphite, talc or a mixture of both
be applied to the seeds and mixed in a uniform manner to ensure
that seeds move easily within the meter.
Check the kits for signs of excessive wear. For more information see
the section End-of-Life Signs on page 10 of this manual.
Check the meter’s seed outlet and the seed tube. Debris inside
the seed tube and poorly installed seed sensors can result in
interference when guiding the seeds to the soil, which in turn
affects the seed distribution.
Check the meter’s drive system. Make sure the system is in proper
operating condition and well lubricated.
Check for objects preventing the Kit Apollo from rotating continuously.
Check that the seeds have been properly lubricated. It is
recommended that dry powdered graphite, talc or a mixture of both
be applied to the seeds and mixed in a uniform manner to ensure
that seeds move easily within the meter. This will ensure that the
seeds are released from the metering disk at the right time.
Reduce speed to check if the problem is being caused by
excessive vibration.
If the seed tube includes a seed sensor, check to make sure that it