16
How to change the battery:
1. Push the battery holder to the side and pull it out.
2. Remove the battery and insert the new one into the slot.
Using the Fan (With the Control Panel)
CAUTION:
• Before using, make sure that all parts of the device are properly assembled and that
there are no parts that have been damaged.
• Always place the device on a flat, dry and stable surface. There is a risk of damage if it
is not installed on a flat and level surface.
• Before using, make sure that the appliance is in the “OFF” position.
1. Plug in the appliance. A “beep” will sound.
2. Press the power button ON/OFF (7) on the control panel. The fan will be activated in the
“NORMAL” mode and the “LOW” indication light (12) will turn on.
3. Press the “SPEED” button (8) consequently to adjust the speed of your choice. The
corresponding indication lights (12) “HIGH”, “MID”, “LOW” will turn on depending on your choice.
4. Select the desired function by pressing the "MODE" button (8). The corresponding “SLEEP”
(15), “NATURE” (16) indication lights will turn on depending on your choice.
5. Press the “SWING” button (9) to select the oscillation function. The “SWING” indication light
(14) will turn on. For static operation, the “SWING” indication light (14) should be off.
6. To set the timer, press the “TIMER” button (11) consequently until the desired time is selected
and the corresponding indication lights (13) turn on. The timer settings range from 1 hour to 10
hours (with one-hour setting). When the time you set is complete, the fan will automatically stop.
7. Press the power button ON/OFF (7) on the control panel to switch off the appliance.
8. Disconnect from the power outlet when not in use.
Using the Fan (With the Remote Control)
CAUTION:
• Before using, make sure that all parts of the device are properly assembled and that
there are no parts that have been damaged.
• Always place the device on a flat, dry and stable surface. There is a risk of damage if it
is not installed on a flat and level surface.
• Before using, make sure that the appliance is in the “OFF” position.
1. Plug in the appliance. A “beep” will sound.
2. Press the power button ON/OFF (18) on the remote control. The fan will be activated in the
“NORMAL” mode and the “LOW” indication light (12) will turn on.
3. Press the “SPEED” button (17) consequently to adjust the speed of your choice. The
corresponding indication lights (12) “HIGH”, “MID”, “LOW” will turn on depending on your choice.
