izzy Ironing system D-188, Инструкция по эксплуатации

Страница: 14 / 23

13
• Check the power cord periodically for possible damages. If the power
cord or the plug of the device has been damaged, do not use the
device and contact an authorized BENRUBI Service Center.
• Make sure that the power cord does not come into contact with the
hot parts of the appliance.
• Always use the appliance on a dry, flat surface, resistant to high
temperatures.
• Do not place the appliance near heat sources, on or next gas or
electric hobs or over hot oven.
• Do not let the power cord of the appliance hang over the edge of a
table or bench top or where a child could grab it. Do not let the power
cord to touch any hot surface.
• Never leave the power cable wrapped during use. Unwind it
completely.
• Do not touch the hot surfaces of the appliance. High temperatures
are generated during use which could cause burns. Always use the
handle and warn others (especially children) of the possible dangers of
burns from steam, hot water or the soleplate.
• The appliance gives off steam which can cause burns. Handle your
iron carefully, particularly when using the vertical steam function.
Never direct the steam towards persons or animals.
• Make sure to keep the sole plate of the iron very smooth. Do not run
it over metal objects like buttons, zips etc.
• Never dampen or iron cloths while wearing them.
• Always place the iron on the heat resistant base. Never allow the iron
stand on its heel.
• Make sure that the iron is placed on its stand and that the stand is
placed on a stable surface.
• Make sure the water is above the MIN indication on the water tank.
• Do not put any detergents or chemical substances in the water tank
or in the boiler.
• Do not move the device by pulling it off the power cord. Ensure that
the power cord is not blocked in any way. Do not wrap the cable
around the body of the device or rotate it.
• Do not use an extension cord or voltage converter with this device.
• This appliance is not intended to be operated by means of an
external timer or separate remote control system.
• Never disconnect the device from the mains by pulling the cord.
Disconnect always by pulling the plug.
• The appliance is installed with a magnetic device. The appliance may
not function properly when located near a strong electromagnetic field