13
EN
Fan FD - 40A
Installation Instructions
WARNING
:
BE SURE TO SHUT
OFF ELECTRIC SUPPLY AT MAIN
SWITCH OR CIRCUIT BREAKER
BEFORE INSTALLATION.THE
IMPORTANT SAFEGUARDS AND
INSTRUCTION APPEARING IN THIS
MANUAL ARE NOT MEANT TO
COVER ALL POSSIBLE CONDITIONS
AND SITUATION THAT MAY OCCUR.
IT MUST BE UNDERSTOOD THAT
COMMON SENSE, CAUTION AND
CARE ARE FACTORS WHICH
CANNOT BE BUILT INTO ANY
PROCDUCT.THESE FACTORS MUST
BE SUPPLIED BY THE PERSON (S)
CARING FOR AND OPERATING THE
UNIT.
NO RESPONSIBILITY WILL BE ACCEPTED
FOR ANY DAMAGE WHICH MAY
OCCUR DURING TRANSPORT OR BY
IMPROPER INSTALLATION OR VOLTAGE
FLUCTUATION OR IF ANY PORTION OF
THE PRODCT HAS BEEN ALTERED OR
MODIFIED.
CAUTION
1. Improper installation may result in the
risk of fire, electric shock, or injury to
persons.
2.
To prevent risk of fire and electric shock,
do not use the unit near windows.
3. Power plug must be removed from
power socket before cleaning, servicing,
maintenance and move from one location
to another.
4. The fan should be placed on a flat and
stable surface when operating to avoid
overturning.
5. The fan should not be placed in a damp
place or where humidity is high (such as
in a bathroom).
ASSEMBLY
1. Secure lower pipe with Pipe support
to the hub of Cross Bass with screw
provided.
2.
Extend upper pipe, insert the pipe
connector through upper pipe onto lower
pipe and tighten.
3. Attach the motor with switch
compartment onto the upper pipe.
Ensure the switch compartment is
pushed fully onto the upper pipe and
secured with the screw provided.
4. Loosen Guard Mounting Nut from the
Motor Housing.
5. Position Back Guard firmly to Motor
Housing and then fasten by turning
Guard Mounting Nut clockwise tightly.
6. Push the Blade along Motor Shaft.
Fasten it firmly with Spinner by turning
counter clockwise.
7.
Hang the Front Guard to Back Guard
with the position fixer provided at the rim
of Guard, and then fix together with clips
provided.
Use of the Appliance
CAUTION
: In order to avoid any
possible hazards, always place the
appliance on a flat, steady and dry
surface before using it.
• Before use the appliance make sure that
you have correctly assembled all the parts
of the appliance. Make sure that all parts
of the appliance are not damaged before
assembly and use.
• Adjust the head of the fan pointing to the
desired direction.
