UVC
sanitizing
door latch
button
Get Germ-Free Clean
It’s time to take cleaning to the next level with our UVC sanitizing
case that kills 99.9% of germs. In just 3 minutes, your Brush Head
and Polishing Cup Head will be cleaner than clean.
Sanitizing 101
Like most tech, the Sanitizer doesn’t love
water. Be sure to remove excess water
from the Brush Head or Polishing Cup
Head before it goes in the Sanitizer.
Press the latch button to open the
case and place the Brush Head or
Polishing Head facing the source of
light. The 3–minute sanitization will
begin automatically when you close
the case—just listen for a click! The
blue “smile” lets you know its working.
Yes, even Sanitizers need cleaning.
To do so, remove and wash the silicone
mat with water and then towel dry.
For the interior and exterior case,
all you’ll need is a gentle wipe with
a damp towel.
When you see the indicator light
flashing red, it’s time to recharge
via the USB-C cable. The case’s
indicator light will turn green when
fully charged.
Note
Opening the case during its cycle
will stop the sanitization process.
You can even store your Brush Head
or Polishing Cup Head in the UVC
Case in between uses. It makes a
great travel case too!
Note
The battery charge lasts about
2 weeks and takes about 2 hours
to charge.
removable
rubber mat
light
source
indicator
light
USB-C
cable port
Note
It’s ok to leave the UVC sanitizer
case on the brush or polishing
head while in the stand in
between uses.
11
10