IZZIWOTNOT Moses Bakset Stand, Инструкции по ремонту

Страница: 5 / 8

3. Attaching the remaining “X” section.
WARNING
When tightening allen key bolts,
DO NOT OVER TIGHTEN!
Bolts should be firmly secure,
but not over compressed.
Over tightening can cause bolt
threads to tear.
IMPORTANT NOTICE :
WHEN ATTACHING THE REMAINING
“x” SECTION IT IS ESSENTIAL THAT
YOU USE THE ALLEN KEYS TO
TIGHTEN THE SCREWS AND BOLTS
AT BOTH SIDES, AND AT THE SAME TIME.
THIS IS TO PREVENT THE PARTS FROM
ROTATING WHEN TIGHTENING.
Assembly
4