Introduction
The Bailey sleigh bed is designed to be used from birth to approximately 4 years.
The base can be fixed in 3 positions. The lowest position being the safest (refer to safety notes).
The cot can be converted into a toddler size bed (approximately from 18 months to 4 years of age).
Important notes
Do not discard any packaging until you have checked the parts against the list below.
Please take a few minutes to read through the assembly instructions.
Unpack your sleigh bed carefully onto a soft level surface such as a carpeted floor.
Familiarise yourself with the parts by comparing them with the checklist provided below.
The recommended mattress size for this sleigh bed is 1400 x 700 x100mm.
There is a small line engraved on each of the side rails (see diagram on page 3).
The engraved line should face the inside of the sleigh bed.
These lines determine the maximum height of the mattress when the base is in the highest position.
(refer to safety notes).
The cot conforms to BSEN716-1 2008 - Safety Standards for cots
The toddler sized bed conforms to BS8509 : 2008+A1:2011 - Safety standards for childrens beds
Parts checklist
Ref
A
B
C
D
E
F
G
H
Part
Description
Blanking Screws
Large Bolt
(M6x100mm)
Medium Bolt
(M6x55mm)
with shank
Barrel nut
(10x15mm)
Barrel nut (
10x20mm)
Dowel
(Dia8x40mm)
Allen key
Medium Bolt
(M6x60mm)
Qty
8
8
4
8
4
4
2
8
2
