iZen IZ-FLO1360, Инструкция по эксплуатации

Страница: 10 / 12

• Do not clean device while charging.
• Do not use water to clean the device.
• Do not use abrasive cleaning chemicals or solvents.
• Do use a slightly damp towel to clean the device.
• Do use the supplied cloth to dry afterward.
Cleaning
Maintenance
Charging
• High-density foam Flow Heads™ should be replaced every
three months or if they show obvious signs of wear and tear or
become dirty.
• Fully charge battery before first use.
• Recharge device monthly to extend battery life.
• Device can be recharged at any time and at any battery level.
• Only recharge using the supplied Flow A/C Wall Charger.
• Do not keep/leave/store batteries in direct sunlight or at temper-
atures above 40°C.
• The battery and charger work best at normal room tempera-
ture. Do not charge in direct sunlight or cold temperatures. The
temperature range for charging is 0°C to 40°C.
• Never leave your device operating or charging unattended.
• It is recommended not to fully deplete the battery.
• When preparing for travel, remove the battery and store separately
in supplied box or carry bag.
• Flow Pro ONE is TSA approved as a carry-on item. When traveling
with spare (uninstalled) lithium-ion batteries they must only be
stored in carry-on baggage. If a carry-on bag is checked at the
gate, all spare lithium batteries must be removed from the bag and
kept with the passenger in the aircraft cabin.
• Fully charge the battery prior to long-term storage.
Travel/Storage
Charging Complete
When fully charged the A/C wall
charger will display a
Green LED
and the device will show all 6
power indicator LEDs filled.
The device will not turn on while
charging.
Low or No Charge
When your device has very low or
zero charge left in its battery the
control panel will display a
Red LED
and may operate sluggishly.
It is not recommended to run the
battery down to this point.
Charging your Device
Plug the A/C wall charger securely
into a wall socket.
The charger unit will display a
Red
LED indicating that the charger is
connected and providing charge
- the charge level LEDs on the
control panel will cycle through -
Red
,
Amber
&
Green
.