[Type here]
Security and Maintenance
1.
The use of non-rated voltage (DC 12V/2.5A) is prohibited.
2.
It is prohibited for non-personnel to repair the massager or
replace parts
3.
If the power cord is damaged, it must be replaced by the
maintenance department or similarly qualified persons approved
by the manufacturer to avoid potential hazards.
4.
Do not use or store the appliance in wet environments or high
temperatures.
5.
Unplug the power cord from the outlet after using.
6.
Ensure that the operation of this product does not exceed more
than 30 minutes at any given time.
7.
If you feel unwell or in any unusual discomfort, please stop using
the product immediately.
8.
If high temperature or foul odor is experienced while using the
product, stop using immediately and unplug the device.
9.
Any individual who may be pregnant or recently gave birth, has a
heart condition or a pacemaker, suffers from diabetes or other
sensory impairment, phlebitis and/or thrombosis, joint
dysfunction, inflammation or injuries, weak bones, osteoporosis, a
high fever, an abnormal or curved spine, is at an increased risk of
developing blood clots, has pins/screws/artificial joints or other
medical devices implanted in his/her body, is being treated for a
medical condition or physical injury or is under a doctor
’
s care
should consult with a medical professional before using a
massaging device designed for home use.
10.
Do not use sharp objects to handle the product in order to avoid
damage.
11.
Please keep the product clean. You can use a soft cotton cloth and
neutral detergents to clean it.
12.
Do not stand when you are using the massager. Do not place
excessively heavy objects on the device in order to avoid damage.
13.
The product possesses a temperature-protection device; it will
automatically shut-off when the temperature exceeds the safe
limit.
Trouble Shooting Guide
Common
Problems
Cause
Solutions
The product does
not work.
1. Disconnected
power or loose plug
causing poor
contact.
2. The power
switch is off, or the
timer has been
reset.
3. The motor auto
shuts off due to the
device being on too
long activating
overheating
protection.
1. Re-plug to the
power source.
2. Turn the power
switch on again.
3. Use the
massager after the
motor cools off
naturally.
The massage
intensity is too
high or too low.
Your foot is
positioned at the
wrong angle.
Adjust the contact
angle to get the
moderate
intensity.
