UM026704-0816
Start the Ledblink Sample Program
S3F80QB Development Kit
User Manual
11
8. After selecting
S3FlashIspII
from the Debug Tool drop-down menu, click
Setup
to
select the serial number of the S3 Flash ISP II you are using, as indicated in Figure 10.
The serial number you see on your screen will be different from the serial number shown
in Figure 10.
9. Click
OK
to close the Setup USB Communication dialog box.
10. Make sure tat the Enhanced ISP Debug Library is selected.
.
11. Click
OK
to close the Project Settings dialog box.
12. If you are prompted to rebuild any affected files, click
Yes
. Otherwise, choose
Build
from the menu bar, then click
Rebuild All
. The following example message is dis-
played.
OUTPUT CHECKSUM
===============
ledblink.hex E909
ledblink.lod E909
0 warning(s)
0 error(s)
Build succeeded.
Figure 10. The Setup USB Communication Dialog
Note:
