IXXAT USB-to-CAN compact, Руководство пользователя

Страница: 7 / 13

Copyright IXXAT Automation GmbH
USB-to-CAN compact - Manual, V1.6
Connections and displays
7
3.1.2.2 USB-to-CAN compact RJ45
The USB-to-CAN compact RJ45 has a bus interface according to ISO 11898-2.
The signals of the bus interface are connected to the 9-pin Sub-D connector (see
table 3-2). The bus interface can be galvanically isolated from the CAN bus as an
option.
Pin Nr. Signal
1 CAN-High
2 CAN-Low
3 GND
4 -
5 -
6 -
7 GND
8 -
Table 3-2: Pin allocation of the RJ45 CAN bus connector
3.2 Displays
The USB-to-CAN interface has two 2-colored LEDs. One LED is allocated to the
USB bus, the other to the CAN bus.
If the USB LED is lit green, communication with the interface via the USB port is
possible. If communication is not possible, the USB LED is lit red.
The CAN LED flashes green with every message received or transmitted without
error. If the CAN controller is in “Error warning“ or “Error passive“ mode, the LED
flashes red with every message. If the CAN controller is in ”Bus off“ mode, the
LED is permanently lit red.
3.3 CAN bus termination
There is no bus termination resistor for the CAN bus assembled on the USB-to-
CAN compact.