IXXAT tinCAN161, Руководство по оборудованию, Страница: 12 / 13

Appendix
Appendix
Technical specifications
PC-card type: PCMCIA type II, 16-bit
Microcontroller: Infineon C161, 25MHz
RAM / Flash: 1 Mbyte / 512 Kbyte
Capacity: 20,000 CAN messages/s
CAN controller: 2x Phillips SJA1000, 16MHz
CAN transceiver: Texas Instruments SN65HVD251D or
Philips PCA82C251T
Max. number of CAN bus nodes: 120
Power supply: 5V DC
±
5%
Power consumption typically 300 mA
Dimensions (L x B x H) in mm 89.5 x 54.0 x 4.5
Dimensions of bus interface in mm: 80 x 45 x 20
Weight incl. bus interface: approx. 130 g
Working temperature range 0 – 55 °C
Relative humidity 10-95%, non-condensing
Signal delay due to
galv. isolation typically 50 ns
EMC test in accordance with EN 55022:1998 + A1:2000 + A2:2003
EN 55024:1998 + A1:2000 + A2:2003
Protection type IP 40
Galv. isolation bus interface: 250 V AC between CAN1, CAN2 and PC
Notes on EMC
In order to comply with the EC directive on electro-magnetic compatibility, the
PCMCIA interface tinCAN161 may only be installed in a PC with a CE-symbol and
an RF-shielded housing. All leads connected to the interface must have a shielded
lead. The shield braiding must be connected to the connector housing using the
largest possible surface area.
Copyright IXXAT Automation GmbH
tinCAN161 - Manual, Version 1.4
12