IXXAT Econ 100, Руководство по оборудованию, Страница: 8 / 22

Connections and displays
3.2 Connections
3.2.1 Power supply connection
Connection of the IXXAT Econ 100 to a power supply uses a 2-pin plug with a
screw connection (Phoenix Contact MC 1,5/2-STF-3,5). The pinout for the
screw terminal is shown in Table 3-3.
Pin designation Signal
+ V+ (+9 V DC up to +32 V DC)
- V- (GND)
Table 3-3: Pinout power plug
3.2.2 LAN 1
The LAN 1 RJ45 connector provides an Ethernet connection for communica-
tion with the IXXAT Econ 100. This supports 1000Base-T, 100Base-TX, and
10Base-T with Auto-MDI-X. The pinouts for the RJ45 connector are shown in
Table 3-4.
Pin no. RJ45 Signal
1 D1+
2 D1-
3 D2+
4 D2-
5 D3+
6 D3-
7 D4+
8 D4-
Table 3-4: Pinout LAN 1 connection
Copyright IXXAT Automation GmbH
8
IXXAT Econ 100 hardware manual,
version 1.3