INTAKE LEGS / INTAKE PLATE ASSEMBLY
1. Attach the Intake Legs to the housing of the AP unit with
the bolts provided.
2. Attach the Intake Plate to the bottom of the Intake Legs.
3. Using quick links, attach the chains to the unit using the
lifting eyebolts. Be sure to tighten quick links with pliers.
(See Figure 1)
Unit Installation - Floating
AP7000 & AP8000
ANCHORING
For floating configurations additional anchoring systems may
be required, such as mooring or tethering, to keep the unit
in position within the pond or basin. In some applications,
suspending the unit from and structure above will work, just
be sure to use the dedicated lifting eyelets or eyebolts.
1
2
Figure 1:
AP Unit Floating Configuration
OPTIONAL FLOAT BALL ATTACHMENT
For attaching float balls, locate the 1' float chains and slide
through the float pipe and add stop bolt at the top after
measuring out desired manifold submergence depth. The
float ball will sit approximately 1/2 of the way submerged in
water. Be sure to tighten the stop bolt to prevent the chain
from sliding down through the pipe of the float ball. (See
Figure 2)
TOOLS REQUIRED
Pliers
5/16” Nut Driver
13mm Socket Wrench and Open End Wrench
Figure 2:
AP Unit Float Assembly
OPTIONAL HOSE ASSEMBLY AND ATTACHMENT
For attaching hoses to the unit, assemble using hose clamp
and 5/16" nut driver on each end. Prior to tightening hose
clamp, be sure that the clamp is located above the barb on
the hose flange to prevent the hose from slipping off the
flange during operation.
Model may vary
Quick Link
Stop Bolt and Float Pipe
© 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | [email protected]
Installation
10099_20200602
O&M_AP7000_&_AP8000_10097_20200602 - 7
