background image

ROVINS – User Manual 

MU–ROVINS–AN-013 Ed. A – March  2012 

ii

 

Icons 

 

The 

Note

 icon indicates that the following information is of interest to the operator and 

should be read. 

 

T

HE 

C

AUTION

 ICON INDICATES THAT THE FOLLOWING INFORMATION SHOULD BE READ TO FORBID 

OR PREVENT PRODUCT DAMAGE

 

T

HE 

W

ARNING

 ICON INDICATES THAT POSSIBLE PERSONAL INJURY OR DEATH COULD RESULT 

FROM FAILURE TO FOLLOW THE PROVIDED RECOMMENDATION

 

Abbreviations and Acronyms 

Abbreviations and acronyms are described in document I

nertial Products - Principle & 

Conventions (Ref.: MU-INS&AHRS-AN-003). 

Overview of this Document  

This document is the product user manual of your ROVINS. It gives all information about 

your product, and about documentation applicable to your product. 

This document is divided into several parts: 

 

Part 1: Introduction

 – This part gives a quick system presentation. 

 

Part 2: Product Documentation

 – This part lists the useful documents for a best use 

of your products. 

 

Part 3

ROVINS Specificities (including External Sensors) - 

This part describes the 

specificities of your product. 

 

Part 4: Mechanical Specifications

 – This part describes mechanical aspects of your 

product, except connectors. 

 

Part 5: Electrical Interface Specifications

 – This part describes electrical aspects of 

your product: the connectors, the power supply and the pin description. This section 

also gives recommended wirings. 

 

Part 6: Verification of Pack Contents

– This part lists gives recommendation when 

you receive your product. 

 

A Table of Contents is available in the following pages to allow a quick access to 

dedicated information. 

 

 

 

 

 

 

 

Содержание ROVINS




































Отзывы: