5
OPERATING INSTRUCTIONS
PL-850 3 W
INTRODUCTION
Dear customer,
Thank you very much for the trust you have placed in us. You have purchased one of the most effective, compact and
reliable work lamps in its class. Please read these instructions carefully prior to taking it into operation.
DELIVERY CONTENT
•
LED work lamp PL-850 3W,
•
Wall charging base + mounting material
•
230 V-power supply
•
12 V-charging cable
•
Diffuser disc
(yellow)
•
Instruction manual
SAFETY INSTRUCTIONS
Please read all the instructions before using this device, they include important information on its correct operation.
In cases of damage incurred by disregarding this instruction manual, the warranty is void.
We do not accept any liability for any damage in consequence! We do not accept liability for any damage to property or
personal injury caused by improper handling or non-compliance with the safety instructions! Any warranty claim will be
void in this case.
•
For safety and licensing
(CE)
reasons, unauthorised conversion and/or modifications to the product are not permitted.
•
The product complies with the requirements of protection type IP 44
(protection against solid objects with diameter
above 1.0 mm, protection against intrusion with a wire and protection against all-around splash water according to
DIN EN 60529).
This is why you should never open the housing, as this protection may no longer be guaranteed.
•
To avoid eye injuries, do not look at the light source or point the light at persons or animals.
•
The product should be kept out of the reach of children! There is a risk for a fatal electric shock.
•
Do not carelessly leave the packaging material lying around since this may become a dangerous toy for children.
•
The product shall not be operated under adverse circumstances such as: Temperatures above 50°C, inflammable gas,
solvents, vapors, dust, humidity over 80% rel. or water.
•
If there can be assumed that operation of the unit under safe circumstances is no longer possible, unplug the unit
immediately and make sure that it not put into operation inadvertently. Operating the unit becomes unsafe when the
unit does not show any signs of working or has been visibly damaged, when damage has occurred during transport of
after storing the unit under unfavorable circumstances.
•
Service and repairs must be conducted by authorized personnel only.
INTENDED USE
This LED work lamp is designed for portable illumination of in- and outdoor areas.
Any other use than those described above may cause damage to the product. Moreover, this can involve hazards such as
short-circuit, fire, electric shock, etc. No part of the product may be modified or rebuilt!
PRODUCT DESCRIPTION
This lamp provides all features an ideal work lamp needs: long lifetime, useful features, robust, splash-protected housing,
easy operation, practical accessories.
The bright 3 W LED generates a good light for working and at the same time offers 20 hours of operating time at full power.
If you need lower light intensity, the runtime can be prolonged by using the two lower performance levels.
The swivel lamp head can be used to aim the beam of light directly at your work field. The mounted yellow diffusing plate
and the flashing function allow the lamp to be used as signal lamp.
The practical wall mount can be used for safely stowing the lamp and simultaneously for charging. When you are travelling,
the lamp can also be charged easily without wall mount using the supplied 230 V or 12 V charging adapters.
The emergency function is an indispensable security factor in the event of a power failure. The work lamp can be used as
highly visible warning light when it is in the flashing mode with the (yellow) diffusing plate mounted.
Содержание 312208
Страница 14: ...14 NOTIZEN NOTES...