ROAM Wireless
Specifications for all Roam Wireless Devices
Battery capacity
110 mAhr
Battery life
> 8hrs
Range
upto 20ft
Sampling Speed
5k samples per sec. aggregate
Resolution
< 6 µV
Weight
16.8g
Dimensions
44.2mm x 42.7mm
Charging the Device
1. The ROAM case is designed to charge the
device. Be sure that the ROAM Wireless
device (the part with the iWorx logo and
serial number) is secure in the case.
2. Take the provided charger cable and
connect one end to the USB port of your
computer.
3. Connect the other side of the charger cable
to the port located on the front of the case.
4. If done correctly, a light will illuminate on
the ROAM Wireless device. A red light
indicates that the unit is charging. A green light indicates a full battery. It takes approximately
two hours for complete charging.
5. Please charge the device before each use. In storage, the device goes to sleep to conserve
energy, but it is still using power to monitor the accelerometer, so that it can be woken up when
needed.
Device Set Up
1. Remove the ROAM Wireless device from the charging box.
2. Plug the USB receiver dongle into the USB port of the computer.
◦
The LED on the receiver will will blink green while it looks for the transmitter. Once the
transmitter is found, the light will stay solid green to show that the connection has been
made. Move the ROAM device transmitter or tap the transmitter if receiver dongle doesn’t
convert to solid green light.
