IWILL UPX, Руководство пользователя, Страница: 67 / 78

3-3
your boot device in Setup, or you can choose a different device each time you
boot during POST by selecting your boot device in
The Boot First Menu .
MultiBoot consists of:
•
The Setup Boot Menu
•
The Boot First Menu
See the Setup Boot menu on p. 13. The following describes the Boot First
Menu.
The Boot First Menu
Display the Boot First Menu by pressing <Esc> during POST. In response, the
BIOS first displays the message, "Entering Boot Menu ..." and then displays
the Boot Menu at the end of POST. Use the menu to select any of these
options:
1. Override the existing boot sequence (for this boot only) by selecting
another boot device. If the specified device does not load the
operating system, the BIOS reverts to the previous boot sequence.
2. Enter
Setup.
3. Press <Esc> to continue with the existing boot sequence.
Boot Menu
Select boot device or Setup.
Use the Up and Down arrows to select the Boot First device, then <Enter> or press
<Esc> to exit.
1. Hard Drive
2. ATAPI CD-ROM
3. Diskette Drive
4. Removable Devices
5. Network Boot
<Setup>
If there is more than one bootable hard drive, the first one in the Setup Boot
menu is the one represented here.
BIOS Utility