4
C
HAPTER 2
Quick Installation
This EIDE Motherboard is shipped with
manufacture preset at :
1.
CPU Clock at
100 MHz
2.
512K Pipeline Burst Cache
on board
3.
Printer ECP Mode at
DMA3
4.
Printer at
IRQ7
, Address at
378h
5.
Serial 1 at
IRQ4,
Serial 2 at
IRQ3
6.
PS/2 MOUSE at
IRQ 12
Reference to the
Chapter 3
&
Chapter 4
, if you
have devices conflict with the manufacture default.
Step 1. Install CPU and Cooler
Ma ke sure the Clock Frequency is set to the sa me a s the CPU
insta lled. (Choose the CPU speed by one jumper on JP15)
Step 2. Install the memory
Plug a t lea st 2 PCS of 72 pins Micro Edge DRAM modules
or a t lea st 1 piece of 168 pins DIMM.
Step 3. Install display controller and connect I/O ports
This system boa rd is designed using
PCI
(Periphera l Component
Interconnect) a nd
ISA
(Industry Sta nda rd Architecture) interfa ce
controller. This s5Volt interfa ce slots. All PCI interfa ce
controllers must be PCI Rev 2.1 complia nt.
Step 4. Connect the power supply
Connect P8 a nd P9 from power supply output.
Step 5. Power on the system
Turn on the Computer power.
Step 6. Setting up the system
Enter the "
Setup Menu
" screen by press the "
Del
" key while
power on or wa rm reset the system. Alwa ys "
LOAD SETUP
DEFAULT
" a t first a nd select others necessa ry tha t your
system require.