IWILL K7S2 Series, Руководство пользователя

Страница: 49 / 101

4: Installing The Motherboar 4: Installing The Motherboar
4: Installing The Motherboar 4: Installing The Motherboar
4: Installing The Motherboard d
d d
d
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U
U U User’
ser’
ser’ ser’ ser’s Manual
s Manual
s Manual s Manual s Manual 4•5 4•5 4•5 4•5 4•5
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installing the Fan/Heatsink
Once you have installed the CPU, you must install a
Fan/Heatsink assembly. The Fan/Heatsink clips onto to
the CPU socket.
Prepare the Heatsink
Before you install the Fan/Heatsink you must prepare
the Fan/Heatsink assembly. The heatsink has a patch of
thermal interface material on the underside that is cov-
ered with protective tape or by a plastic cover that cov-
ers the entire bottom of the heatsink. You must remove
the tape before you install the Fan/Heatsink assembly.
To remove the plastic cover, just pull it off. To remove
the tape do as follows:
1. Hold the free end of the tape at a 90° to the surface
of the heatsink. Pull the tape off with a smooth
quick movement that removes the tape only and
not the underlying thermal interface material.
Remove protective tape
from the Thermal
Interface Material
Remo Remo
Remo Remo
Remov vv
vve Pr
e Pr
e Pr e Pr
e Protectiv otectiv
otectiv otectiv
otective T e T
e T e T
e Tape: ape:
ape: ape:
ape:
Remove the protective
tape covering the thermal
interface material on the
underside of the heatsink
by quickly pulling it off
at an angle of 90
0 to
the heatsink.
Next, install the processor Fan/Heatsink assembly as de-
tailed below.