iWeld 80POCPWR130, Руководство пользователя

Страница: 67 / 72

HU
EN
2-3. Checking
1. Make sure the machine is properly grounded!
2. Make sure that all connections are perfect, especially grounding of the machine!
3. Check that the electrode cable connection to be perfect!
4. Make sure that the polarity is correct outputs!
5. Welding spatter can cause a
fi re, so make sure there are no fl ammable materials in
the work area!
3. Operation
1. Turn on the main power switch, the fan will start rotating.
2. Adjust welding parameters for welding in accordance with the value speci
fi ed for
practical application.
3. Usually the welding current is formed in accordance with the electrode diameters as
follows. Make sure that it is current with reserve your unit has, otherwise do not even
try to get the job done!
The welding current reference for different electrode diameter
Electrode diameter/mm 1.6 2.0 2.5 3.2 4.0
Welding current/A 40-80 60-100 80-120 100-150 140-180
3-1 Control Panel Functions
1 Thermoprotection indicator
2 Power on indicator
3 Current adjust knob
POCKET POWER 130
130
75
45
20
100
2
1
3
7