PTT 1
PTT 2
Antenna
FRAGILE
-
Do not try to bend or twist the antenna
Volume Down
In Master Reset Mode, this button
reduces the sound quality and
enhances the range. When
selected, press MODE button to
save.
Volume Up
In Master Reset Mode, this button sets
the sound quality high and the range to
standard. When selected, press MODE
button to save.
MODE button
From OFF Position:
Press & hold for 2 sec
ON
Press & hold for 5 sec
Pairing Mode 1 Mobile Phone
Press & hold for 10 sec
Pairing Mode 2 Intercom
Press & hold for 15 sec
Pairing Mode 3 Peer
-
To
-
Peer*
Press & hold for 25 sec
Master Reset / Range setting
Press & Hold for >30 sec
Automatic OFF
From ON Position:
Press & Hold for 2 sec
OFF
Indicator LED
GREEN
Flash
ON
BLUE
Fast Flash
Pairing mode
BLUE
Slow Flash
Paired / Active
RED
Flash / 5 sec
Low Battery
RED
Flash
Charging
When fully charged light turns OFF
Headset Connector
Align RED dots with your headset connect-
or
Push/Pull connector. Do not twist or bend
iriBelt II
In the box
•
iriBelt II
•
Charging Pad
•
USB cable for charging pad
•
Quick Start Guide
Please contact your local dealer immediately if something is missing.
Before first use
Charge the battery to full before first use.
Front side view
* When pairing Peer
-
To
-
Peer, one unit must be in Pairing
Mode 2 and the other in Pairing Mode 3
Swivel Belt Clip
Inductive Charging Area
Serial Number
iriBelt II
Charging
iriBelt II has an advanced inductive battery charge circuit. The 800 mAh Li
-
Ion battery provides long life and long operational
time
-
up to 24 hours.
When iriBelt II is turned ON, a Voice Prompt will inform of the present battery status with a “Battery High” (80
-
100%),
“Battery Medium” (20
-
80%) or “Battery Low” (10
-
20%). At the 10% battery level there is an automatic Cut Off, which will turn
off iriBelt II.
When the Low Battery level is reached, the Status LED on the front, will flash RED every 5 seconds.
To charge iriBelt II place the unit on top of the QI wireless charging pad. The Status LED will flash RED every 2 seconds, as long
as the battery is being charged. When the battery is fully charged the Status LED will stop flashing and turns off.
It doesn’t matter if iriBelt II is ON or OFF during charging.
Rear side view
