iwc AQUATIMER DEEP TWO, Руководство по эксплуатации

Страница: 17 / 92

14 | 15 Attaching the bracelet
Attach the component parts of the bracelet link to the
connection point and push the pivot pin into the bracelet
from the side (1).
Using the special tool provided, now press the securing
pin downwards (2) and, at the same time, slide the pivot
pin back into the bracelet until it lies flush (3). The secur-
ing pin must be brought up flush with the upper edge of
the securing link. Please be sure to check that the pivot
pin is correctly seated.
Changing between different types of bracelet
Your IWC watch has a bracelet quick-change system* that enables you to
change the bracelet quickly and simply, without the use of tools.
To remove the bracelet, use your thumb to push down
the retaining lever (1) on the underside of the horns.
While holding the lever down, slide the connecting link
out vertically from the underside of the case (2).
1
2
* The Aquatimer bracelet quick-change system has been developed by IWC under a patent licence
from Cartier.