Step 10 - Power-ON the Development Platform
Connect the 12V power supply plug to the power connector (J4)
of the Development platform as shown below and switch ON
the power supply.
Warning :
1. Do not try to connect any other power supply other than supplied along
with the Development platform.
2. Do not plug or remove the Arria10 SoC / FPGA SOM from carrier board with
live power.
3. Contact iWave if power LEDs are not glowing.
Once power is applied to the Development platform, the power
LEDs in Arria10 SoC/FPGA SOM and High Performance carrier
board will glow as shown in the below image.
Quick Start GuideiW
-RainboW
-G28D
iW
-RaniboW
-G28D
iW
-RainboW
-G28D
iW
-RainboW
-G28D
iW-RainboW-G24DiW-RainboW-G24D
12
