REL 1.0
Page 49 of 53
Cyclone V SoC Qseven SOM Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
3.3.2
Guidelines to insert the Qseven SOM into Carrier board
Make sure that the carrier board is completely powered off.
Insert the Qseven module in to the MXM connector at an angle of 45° as shown below in the first photo.
Check the Notch position of Qseven module is proper while inserting.
Once the Qseven module is inserted to the MXM connector properly, press the board vertically down as
shown below (in the second photo), such that the board is fixed firmly into the expansion connectors.
Figure 15: Qseven Module Insertion procedure
Note: Photo shown above is for only reference and not exactly represents Cyclone V SoC Qseven SOM.