Warning:
1. Do not try to connect any other power supply other than the supplied
one along with the Development Kit.
2. Do not plug or remove the SOM from carrier board with live power.
3. Contact iWave If power LEDs are not glowing.
Once Power is applied to iW-RainboW-G34D i.MX 8M Mini or iW-
RainboW-G37D i.MX 8M Nano SODIMM Development Platform, the
Red Power LEDs in the i.MX 8M Mini or i.MX 8M Nano SODIMM SOM
and carrier board will glow as shown in the below image.
Connect the 5V power supply plug to the power connector (J2) of the
iW-RainboW-G34D/G37D platform as shown below and switch ON the
power supply.
iW-RainboW-G28D
Power-ON the Development Platform
09
iW-RainboW-G34D
Quick Start Guide
Quick Start Guide
Quick Start Guide
