Iwatsu OM-8WRLS, Руководство пользователя

Страница: 24 / 63

QUICK SETUP GUIDE - 16
ƒ
To ensure the handset is fully charged, place the handset in the
battery charger for 24 hours before use.
ƒ
While programming, each handset is identified by the digital port
where it is connected on the base unit: Port 1 = L1 (line 1), Port 2 =
L2 (line 2).
WIRELESS BASE UNIT
The wireless base unit is a compact radio transmitter that connects the
Omega-Phone 924 telephone system with the Wireless Key Telephone
Handset. The base units contain Printed Circuit Boards (PCB’s) that can be
susceptible to excessive heat or cold. Therefore, the base units should be
mounted in a clean environment controlled area with a relative temperature
of 50 to 80 degrees Fahrenheit with a relative humidity of 40 to 80 percent.
The base unit is line powered by the Omega-Phone 924 system through the
RJ11C jack. There is no need to locate this unit near an AC outlet. The base
unit should be centrally located for maximum wireless coverage for the
handset(s).
The Wireless Base Unit can be surface or wall mounted. The base unit
comes with a standard wall mount bracket and the antenna can be kept
straight for wall mount, or bent at 90 degrees for surface mounting.
Wireless Base Unit Setup
1. Unpack the Wireless Base Unit.
ƒ
To provide the best possible signal the unit should be located at an
optimum height and location for the coverage area. Like all
wireless systems, the wireless handset works best when it is in the
line-of-sight of the base unit. Obstacles such as concrete or metal
walls can substantially limit the range. Although rare, other
equipment in the same frequency range may cause interference.
When using more than one base unit, be sure to place them at least
20 feet apart.