External Call Forward
You can forward a call to an external telephone
number. To use this feature you must first register
the external telephone number to a personal
speed dial code (90-99.) (See the Speed Dial
feature in the Digital Telephone Station User
Quick Reference Guide.)
You can also set the type of calls you want to be
externally forwarded by choosing an external call
forwarding mode. The three modes are CO and
ICM calls (4), CO calls only (5), and ICM calls only
(6).
To set External Call Forward
þ
Lift the receiver (handset)
þ
Press [FWD]+ [#] + [*] + PERSONAL SPEED DIAL
CODE (90-99)
To cancel External Call Forward
þ
Lift the receiver (handset)
þ
Press [FWD] + [*]
To forward CO and ICM calls externally
þ
Lift the receiver (handset)
þ
Press [FWD] + [#] + [#] + [4]
To only forward CO calls externally
þ
Lift the receiver (handset)
þ
Press [FWD] + [#] + [#] + [5]
To only forward ICM calls externally
þ
Lift the receiver (handset)
þ
Press [FWD] + [#] + [#] + [6]
Transfer to Park
You can transfer a call to another user’s individual
park on their telephone. The call can then be
picked up remotely from another telephone. The
call can also be picked up from the telephone
where it is parked.
Transferring a call to another user’s individual park
When speaking on an outside line
þ
Press [TRAN] + [PARK]
þ
Dial the number of the extension where the call is
to be parked, or press the extension button (if
assigned)
þ
When you hear confirmation tone, hang up
þ
The [PARK] key on the user’s phone will be lit
þ
If desired, Use the paging system to inform the
user of the call parked on their telephone
Picking up a call parked on your individual park
from your telephone
þ
Lift the receiver (handset)
þ
Press [PARK]
Picking up a call parked on your individual park
from another telephone
þ
Lift the receiver (handset)
þ
Press [PARK]
þ
Dial the number of the extension where the call is
parked, or press the extension button (if assigned)
or
þ
Lift the receiver (handset)
þ
Press the [FEAT] button and dial [3] [4]
þ
Dial the number of the extension where the call is
parked, or press the extension button (if assigned)
or
þ
Lift the receiver (handset)
þ
Press [PARK Pick Up]
þ
Dial the number of the extension where the call is
parked, or press the extension button (if assigned)
Whisper Page
You can talk to another extension while they are
on a call. The call interruption is not audible to
the person on the extension’s line. The person on
the extension’s line also cannot hear the response
from the extension.
To talk to a busy extension
When you call another extension and get a busy
signal, do not hang up
þ
Press [*]
þ
Begin speaking
To respond to a whisper page while on a call
After receiving a whisper page
þ
Press [*]
þ
Begin speaking
To return to your original call after a whisper page
þ
Press [*]
þ
Begin speaking
Caller ID, ANI, DNIS Information Storage
Your telephone may be programmed to store and
display the telephone number and ID from calls
received with Caller ID, ANI or DNIS information.
Operation for this feature is the same as the
operation for the “Abandoned Call Storage”
feature listed in the ADIX Digital Telephone User
Quick Reference Guide.
Voice Mail Monitor (Answering Machine
Emulation)
Station users may monitor voice mail messages as
they are recorded. During recording monitor, the
station user may select to initiate a conversation
with the caller. You may program your extension
for Automatic Monitor or User Initiated Monitor.
You may also activate or deactivate this feature
from your extension.
