9
The present indication mode will be displayed:
•
Dial the number for the desired mode.
•
Dial
1
for immediate display and ringing.
or
•
Dial
2
for delayed indication (display and ringing
starts if call is not answered within a
preprogrammed time).
or
•
Dial
3
for no ringing (lamp indication only).
Call Divert
When a call is ringing at your station and your sta-
tion is idle, off hook, or on a call, you can send that
call immediately to your
Call Forward No Answer
Destination.
•
Press your [
MBOX
] key.
Note: Call Divert does not apply to ACD Calls.
Call Pick-Up
Internal Group
You may answer calls to any extension in your pick-
up group without dialing the extension number.
When you hear a call ringing at another extension:
•
Lift receiver.
•
Press
FEATURE
and dial
3
+
1
.
or
•
Press the [
GROUP CALL PICK-UP
] key (if
assigned).
•
The incoming call is connected to your extension.
Direct Extension
You may also answer an incoming call at another
extension:
•
Lift the receiver.
•
Press the
FEATURE
key and dial
3
+
3
.
or
•
Press the [
DIRECT CALL PICK-UP
] key.
•
Dial the number of the extension where the call is
ringing.
•
The incoming call is connected to your extension.
Call Recording
You can record a call to voice mail by following the
procedures listed below:
Important: Use of this feature may be prohibited by
state law.
To start recording a call to voice mail
While on an ICM, outside line, or conference call:
•
Press the [
RECORD
] key.
•
Your call will begin recording to voice mail.
Note: A four-party conference call cannot be re-
corded.
To stop recording a call to voice mail
While recording a call with the [
RECORD
] key lit:
•
Press the [
RECORD
] key or hang up.
To play a recorded call:
•
Follow the same procedure for playing a voice
mail message.
