USE AND CARE INSTRUCTIONS - IMPORTANT SAFEGUARDS
●
READ ALL INSTRUCTIONS BEFORE OPERATION
●
1.
USE AN INDIVIDUAL 120VOLT, 15AMP FOR IWA-1500 & IWA-1800 ELECTRICAL
SOCKET.
IWA-1800 & IWA-1500
120V
USE AN INDIVIDUAL 208VOLT/240VOLT, 15AMP FOR IWA-2500 ELECTRICAL SOCKET.
IWA-2500
208v/240V
2.
DO NOT BLOCK THE AIR-OUTLET LOCATED AT THE BACK OF THE INDUCTION
RANGE. BLOCKING MAY OVERHEAT THE UNIT.
3.
USE PANS 5 INCHES OR LARGER IN DIAMETER. WE RECOMMEND PANS BE LESS
THAN 10 1/2 INCHES IN DIAMETER. PLEASE REFER TO THE NEXT PAGE FOR A
LIST OF SUITABLE AND UNSUITABLE PANS.
4.
DO NOT TOUCH THE HOT SURFACE OF THE VITRO-CERAMIC GLASS PLATE.
NOTE:
THE INDUCTION RANGE ITSELF DOES NOT PRODUCE ANY HEAT DURING
COOKING. HOWEVER, THE HEAT FROM THE PAN WILL LEAVE THE SURFACE OF
THE VITRO-CERAMIC GLASS PLATE HOT !
5.
DO NOT COOK EMPTY POTS OR PANS. HEATING AN EMPTY PAN WILL
AUTOMATICALLY ACTIVATE THE OVERHEATING PROTECTION DEVICE AND THE
UNIT WILL SHUT OFF.
6.
PLACE THE INDUCTION RANGE ON A HORIZONTAL SURFACE AND AT LEAST 4
INCHES AWAY FROM THE WALL AND OTHER OBJECTS FOR PROPER VENTILATION.
7.
DO NOT PLACE ANY OBJECTS OR TOOLS IN THE AIR-INTAKE (ON THE BOTTOM) OR
AIR-OUTLET (ON THE BACK). DOING SO MAY CAUSE ELECTRICAL SHOCK.
8.
TO PROTECT AGAINST ELECTRICAL SHOCK, DO NOT IMMERSE THE UNIT, THE
CORD, OR THE PLUG IN OR NEAR WATER OR OTHER LIQUIDS.
9.
CLOSE SUPERVISION IS NECESSARY WHEN THE INDUCTION RANGE IS USED BY
OR NEAR CHILDREN.
10.
DO NOT OPERATE THE INDUCTION RANGE IF IT HAS BEEN DAMAGED IN ANY
MANNER OR IF THE UNIT MALFUNCTIONS. RETURN THIS UNIT TO THE NEAREST
AUTHORIZED SERVICE FACILITY FOR EXAMINATION OR REPAIR.
11.
THE USE OF ANY ACCESSORIES NOT RECOMMEND BY THE MANUFACTURER MAY
CAUSE INJURIES.
12.
KEEP THE POWER CORD AWAY FROM HEAT.
13.
DO NOT PLACE THE INDUCTION RANGE IN, ON , OR NEAR OPEN FLAMES,
ELECTRIC BURNERS, HEATED OVENS OR OTHER HIGH TEMPERATURE
SURROUNDINGS.
14.
DO NOT HEAT ANY SEALED CANS ON THE INDUCTION RANGE. A HEATED CAN
MAY EXPLODE.
15.
DO NOT MOVE THE INDUCTION RANGE WHILE COOKING OR WHEN THE PAN IS
HOT.
16.
AFTER THE INDUCTION RANGE HAS COOLED DOWN, UNPLUG THE CORD AND
CLEAN AS FOLLOWS,
VITRO-CERAMIC GLASS: WIPE WITH DAMP CLOTH OR USE A MILD, NON-ABRASIVE
CLEANING SOLUTION.
BODY: WIPE THE CONTROL PANEL WITH SOFT CLOTH OR USE A MILD CLEANER.
17.
DO NOT USE INDUCTION RANGE FOR OTHER THAN INTENDED USE.
18.
UNPLUG WHEN NOT IN USE.
19.
WHEN STORING, DO NOT PLACE ANY OBJECTS ON TOP OF THE INDUCTION
RANGE.
SAVE THIS INSTRUCTION !!!
1
