Iwata HP-TR1, Руководство по эксплуатации

Страница: 8 / 16

Choose an Cleaning the Airbrush Between Colors
1. Dump out the color cup’s excess paint.
2. Rinse the cup with the appropriate cleaning solution.
3. Use a paper towel to wipe out any left-over paint.
4. Fill the bottom of the cup with cleaner.
5. Spray cleaner until the spray is clear.
6. Add the next color to the color cup.
7. Repeat cleaning procedure when finished.
Cleaning the Needle
1. Unscrew the handle (#16) from the airbrush body.
2. Loosen the needle chucking nut (#14).
3. Gently pull the needle (#13) straight out.
4. Fold a soft cloth damp with cleaner over the needle.
5. Rotate the needle to gently wipe the residual paint off.
6. Carefully insert the needle into the airbrush until it seats
fully against the nozzle (#3).
7. Tighten the needle chucking nut finger tight.
• Pull the trigger back and forth to visually confirm the
needle’s ability to move.
8. Screw the handle back onto the airbrush body.
Before Each Session
Spray water, or the appropriate paint solvent, through the
airbrush to make sure the airbrush is working properly.
After Each Session
Or any time the airbrush becomes clogged.
1. Increase the air pressure.
2. Spray cleaning solution for a short time.
3. Clean the needle if necessary
Cleaning the airbrush this way helps clean the paint passage,
the nozzle, and the needle thoroughly.
MAINTENANCE