iWantit iHBTDAB14, Инструкция по эксплуатации, Страница: 21 / 32

FM operation
switching from DAB to FM mode
To switch the unit to FM mode, Press MODE repeatedly to select FM mode. The display will
show the frequency.
auto scan
Press SCAN/ until the tuner starts searching for a station. To scan down the frequency
band, press and hold SCAN/ . Once a station has been found, the scanning will stop
automatically.
The search may not stop at a station with a very weak signal.
manual scan
To search for FM stations manually, press repeatedly until your desired frequency is
reached.
With FM radio it may be necessary to fine tune each station by pressing
repeatedly. Each press/tap will adjust the frequency by 0.05MHz. If reception is still
poor adjust the position of the aerial or try moving the radio to another location.
audio mode
Press SELECT/MONO/ST. on the remote control to toggle between the Stereo or Mono
selection.
The unit will automatically switch between stereo and mono mode, but you can
override this and switch this function manually. This is helpful when receiving poor
signal reception.
preset stations
You can store up to 30 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold MEMORY. The display will show “Preset Store <#: (Empty)>”.
2. Press PRESET to select your desired preset station number.
3. The station will be stored in few seconds and the screen will then show “Preset #
Stored“.
21