iWantit IBTLI17, Инструкция по эксплуатации

Страница: 11 / 16

11
power source
connecting to the mains supply
• This unit was designed to
operate with an AC 220-240V
power supply.
• Connecting the unit to any other
power source may cause damage
to the unit. Unwind the mains
cable to its full length. Connect
the end of the cable to the AC~
Socket at the bottom of the unit
and then connect the mains plug
to the mains socket The unit is
now connected and ready to use.
• To switch the unit off completely,
unplug the mains cable from the mains socket.
While connecting the unit with the mains cable, do not place the unit inverted to avoid
damages to the lightning connector.
general operation
powering on/off
• When you first connect the unit to the mains socket, the unit will be in STANDBY mode.
The standby indicator will light up red.
• Press the Standby button on the unit or remote control to switch on the unit. The unit
will enter the last selected mode.
• Press Standby button to switch the unit to STANDBY mode.
• To completely turn the unit off, switch the unit back to standby mode, and then
disconnect the unit from the mains socket.
If the unit is idle for more than 15 minutes, it will automatically switch to STANDBY mode.
Press the Standby button to switch on the unit again.
selecting a mode
Press the SOURCE button repeatedly on the unit or press the AUX, BT (Bluetooth), USB,
DOCK buttons on the remote control to select the desired mode.
adjusting the volume
• Press the VOL+/VOL– button to adjust the volume.
• If you wish to switch the sound off, press the MUTE button on the remote control. Press
the MUTE button again or the VOL+/VOL– button to resume normal listening.
Select Equaliser (EQ) Effect
• Press the DFLT/POP/CLASSIC/JAZZ/ROCK button on the remote control to select the
preset equaliser effect.
To the mains socket
Bottom view of the unit