iWALKFree iWALK 2.0 Скачать руководство пользователя страница 6

STEP 3

STEP 2

Attach Lower Assembly to Knee 

Platform (12). 

1. Press in spring head

2. Insert tube until spring head fills 

hole A. 

3. Test connection. Grasp tube and 

pull down forcibly.  Confirm tube 

is locked into Knee Platform.

A)

 Identify Right Support Tube (7) by letter “R”

B)

 Push the silver spring head and insert Support Tube (7) into Knee Platform (12).  Keep 

downward pressure on Upper Assembly Tube while inserting.  You are done when the silver 

spring head fills the hole in the Knee Platform. 

Hint – if spring does not fill the hole, wiggle the 

tubes until spring head pops out.

C)

 Test the connection!  Simultaneously pull UP on the Upper Assembly tube while pulling 

DOWN on the Support Tube (7).  It must be impossible to pull them apart.  TEST BOTH LEFT 

AND RIGHT CONNECTIONS.  

C

B

A

WARNING – Upper Assembly tube, Support Tube (7) and Knee Platform (12) must all be 

locked together.   Confirm for Left and Right sides.  If not locked, instability and injury can 

result.

Assembly

5

PULL 

UP 

PULL 

DOWN

LOCKED!

1. PRESS 

SPRING IN

A

2. INSERT 

TUBE

TEST

LEARN FASTER!  View INSTRUCTIONAL VIDEOS instead! 

www.iwalk-free.com/help 

Содержание iWALK 2.0

































Отзывы: