IWAKI PUMPS APN-450 Скачать руководство пользователя страница 4

Страница: 4 / 36

- 2 -

WARNING

Safety instructions

●

Turn off power

Risk of electrical shock. Dismantling/assembling the pump unit without turn-
ing off power may cause an electrical shock. Before engaging in any mainte-
nance or inspection work, be sure to turn off the pump and related devices.

●

For specified application only

The use of the pump in any application other than those clearly specified
may result in injury or damage. Use the pump in a specified condition.

●

No modification

Do not modify the pump. We are not responsible for any accidents or dam-
age due to modification.

●

Specified power only

Do not apply any power other than the specified one on the nameplate.
Otherwise, personal injury or property damage may result.

●

Wear protective clothing

Always wear protective clothing such as safety goggles and protective gloves
during pipework or dismantlement.

● Do not touch the pump or pipe with bare hands

The surface temperature of the pump or pipe rises high along with gas tem-
perature in or right after operation.

CAUTION

●

Restriction on operators

The pump should be handled by a qualified person with a full understanding.

● Ventilation

Poisoning may result when handling a toxic or odorous liquid. Keep good
ventilation in a working area.

● Operating and Storage conditions

Do not install or store the pump:
1. Where ambient temperature falls below 0°C or exceeds 40°C.
2. Under a flammable/corrosive atmosphere.

●

Countermeasure against efflux

Take protective measures against the accidental efflux caused by diaphragm
breakage.

Prohibited

Electrical shock

Wear protective

gear

No Remodeling

Prohibited

Electrical shock

Prohibited

Electrical shock

Содержание APN-450





































Результаты поиска

Содержание APN-450

Отзывы:

Похожие инструкции для APN-450

Бренды по названию

Популярные бренды

IWAKI PUMPS APN-450, Инструкция по эксплуатации

Результаты поиска

Содержание APN-450

Отзывы:

Похожие инструкции для APN-450

Бренды по названию

Популярные бренды