15
Warranty /
Procedure in case of repair
Product specifications
The warranty period for Bluephase N is 3 years from the
date of purchase (battery 1 year).
Malfunctions resulting from faulty material or
manufacturing errors are repaired free of charge during
the warranty period. The warranty does not provide the
right to recover any material or non-material damage
other than the ones mentioned. The apparatus must only
be used for the intended purposes. Any other uses are
contraindicated. The manufacturer does not accept any
liability resulting from misuse and warranty claims
cannot be accepted in such cases. This is particularly
valid for:
– damage resulting from improper handling, especially
incorrectly stored batteries (see Technical data:
Transportation and storage conditions).
– damage to components resulting from wear under
standard operating conditions (e.g. battery).
– damage resulting from external influences, e.g. blows,
drop to the floor.
– damage resulting from incorrect set-up or installation.
– damage resulting from connecting the unit to a power
supply, the voltage and frequency of which do not
comply with the ones stated on the rating plate.
– damage resulting from improper repairs or modifica-
tions that have not been carried out by certified
Service Centers.
In case of a claim under warranty, the complete
apparatus (handpiece, charging base, power cord, and
power pack) must be returned, carriage paid, to the
dealer or directly to Ivoclar Vivadent, together with the
purchase document. Use the original packaging with the
corresponding cardboard inserts for transportation.
Repair work may only be carried out by a certified
Ivoclar Vivadent Service Center. In case of a defect that
cannot be rectified, please contact your dealer or your
local Service Center (see addresses on the reverse side).
A clear description of the defect or the conditions under
which the defect occurred will facilitate locating the
problem. Please enclose this description when returning
the apparatus.
Delivery form
1 Charging base, 1 Power cord, 1 Power pack, 1 Handpiece, 1 Battery
(Li-Po), 1 10 mm light probe, 3 Anti-glare cones, 1 Set of Instructions
for Use
Accessories
The following accessories are available for Bluephase N:
REF
Description
656196
Light probe 10 mm, black (N)
608538
Pin-point light probe 6>2 mm, black
551756
Anti-glare cones
592496
Anti-glare shield
659956
Bluephase N battery
659681
Bluephase N handpiece
607922
Bluephase Meter
608554
Bluephase sleeves
Technical data
Operating voltage charging base 5 VDC
Operating voltage handpiece
3.7 VDC with battery
5 VDC with power pack
Power pack
100–240 VAC / 50-60 Hz /
max. 0.4 A
Manufacturer: Friwo
Output
5 VDC
TYPE 15.2630
Operating conditions
Temperature
+10 °C to +35 °C (+50 to +95 °F)
Relative humidity
30% to 75%
Ambient pressure
700 hPa to 1060 hPa
Dimensions of the charging base
L=205mm W=150mm H=85mm
Weight of the charging base
250 g
Charging time
approx. 2 h (with the battery empty)
Power supply of the handpiece
Li-Po battery
Max. battery time
approx. 60 min. (with a new, fully
charged battery)
Light source
Polywave
®
LED
Wavelength range
385 – 515 nm
Light intensity
max. 1,200 mW/cm
2
± 10 %
Operating
5 min. on / 6 min. off
(intermittently)
Dimensions of the handpiece:
L=260mm W=42mm H=120 mm
Weight of the handpiece
(incl. battery) 225 g
Transportation and storage conditions:
Temperature
-20 °C to +60 °C (-4 to 140 °F)
Relative humidity
10% to 75%
Ambient pressure
500 hPa to 1060 hPa
Bluephase N has to be stored in closed, roofed rooms.
Protect the device from severe jarring.
Battery
– Do not store at temperatures above 40 °C / 104 °F
(or 60 °C / 140 °F for a short period).
Recommended storage temperature 15 – 30 °C (59 – 86 °F).
– Always store the battery charged
– and not for longer than 6 months.
