![iVision IV-WD1070A Скачать руководство пользователя страница 1](http://html1.mh-extra.com/html/ivision/iv-wd1070a/iv-wd1070a_user-manual_2097585001.webp)
User’s Manual
Professional WDR Box Camera
Model No.
IV-WD1070A
Video System
NTSC/ PAL System
Sensor
1/3" Sony Double Scan 960H CCD
Numbers of Pixel
NTSC: 976H*494V; PAL: 976H*582V
Resolution
650TVL(Color), 700TVL(B/W)
Day & Night
AUTO, COLOR, B/W, EXT1, EXT2
Sync.
Internal Sync/ Line in Lock
Burst
ON/ OFF
Signal Noise Ratio
50dB Min. (AGC off)
ESC Auto Shutter
NTSC: 1/60~1/100,000; PAL: 1/50~1/100,000
DC Manual Shutter
1/60(50), 1/120(100), 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000
DNR
3DNR, Off, 2DNR
Motion Detection
OFF/ ON (4 Programmable Zone), Alarm Out
Privacy
OFF/ ON (15 Programmable Zone)
Mirror
Off, V-Flip, H-Flip, HV-Flip
Sharpness
0~15
White Balance
ATW (2,000°K~10,000°K)
PUSH/ USER1/ USER2/ ANTICR/ MANUAL/ PUSH LOCK
OSD Language
English
Auto Gain Control
0~20
Gamma Correction
0.45
Video Output
1.0Vp-p/ 75 ohm Video 0.714Vp-p Sync 0.286Vp-p
IR LEDs
36pcs
Min. Illumination
0.00003Lux (IR LEDs ON)
Auto Gain Control
0~20
Power Current
150mA
Voltage Input
DC12V± 10%
Operation Temp.
-20°C~50°C
Storage Temp.
-25°C~70°C
Humidity Range
20%~90% RH
Dimension
118L*64W*64H mm
Net Weight
300g
Technical
Specifications:
Feature:
1/3" Sony Double Scan 960H CCD
Ultra High Resolution 700TVL
Super Low Sensitivity 0.00003Lux
Ultra Wide Dynamic Range
3D+2D Digital Noise Reduction
Full OSD Menu operation via RS485 or OSD joystick
Privacy Zone, Motion Detection
Installation:
To prevent shock or damage to the waterproof body, tighten all the screws and cover
Adjust the visor to prevent the lens from direct sunlight
Do not directly touch the front glass. To clean the dust, wipe with soft cloth with alcohol.
Don’t install it in the place where dithering and shake often
Don’t install it in the place where temperature is above 50°C or below –20°C
Video line tie-in and DC tie-in must be avoided to touch water.
If abnormal, please power off and contact the manufacturer
N ote : Non-regulated power supply may cause camera damaged.