iVigil IP3H00, Руководство пользователя

Страница: 38 / 66

- 38 -
3.3 Alarm
Alarm setting is similar to motion detection setting. The difference is that alarm doesn’t repeat
trigger action for the same event. Alarm trigger duration is about 10 seconds, after system
completes trigger actions, which takes 3 seconds, alarm will back to original status till next
event happens.
Alarm In/ Out Mode
Select alarm mode to setup alarm event trigger On/ Off.
Status
Enable this item to activate alarm trigger.
Alarm Out
Enable to trigger alarm out while alarm is triggered.
Log
Enable to store log in backup device while alarm is triggered.
E-mail
Enable to send E-mail with snapshot while alarm is triggered.
FTP
Enable to upload event recording files to FTP site while alarm is triggered.
Save to
Enable to save snapshot and event recording files to [None, SD card] while alarm is
triggered. Please notice that choosing storage none means no files will be saved.
External IR illuminator control mode
External IR illuminator is triggered by alarm in. When trigger is on, external IR
illuminator keeps on; image switches to night mode regardless of light sensor detection.
IR illuminator trigger by CDS detection mode
External IR illuminator is triggered by light sensor. When light sensor detects night
mode, external IR illuminometer keeps on; image switches to night mode.
※
Please click on “Save” button to save settings. It takes 10 seconds to overwrite the
new setting into system file; any operation needs to wait for 10 seconds.